Components are designed for up to and including 20A 600V for lighting and branch wiring installations.

Single and Multi-Circuit families up to 9 wires satisfy a variety of applications encountered in new buildings, retrofits and maintenance situations.

Devices provide system integration with other manufacturer's equipment such as light fixtures, furniture cable systems or custom assemblies. Cable mating connectors are integrally moulded to ULTRALX® premium dual-listed MC/AC90 Cable.

• Versatile - Designed for use in ceilings, under floor, walls and systems furniture

• Cost-Effective - Reduces installation time by up to 30%

• Safe - Systems up to 347V suitable for interrupting current; make or break under load

• Flexible - Easily reconfigurable to handle churn and changing requirements

• Proven - Currently installed in a number of industrial, commercial and institutional spaces

• Smart Connect Lighting Applications
• Smart Connect Power Applications
• Smart Connect - Complete Modular Wiring Solution
• Smart Connect - Lighting Control (Smart Light™) Application
• Link to May/June 2008 Electrical Source Article - MWS The Construction Cost Cutter
• Link to SustainableBuilding.com Modular Lighting Article Download pdf version

The Fixture Interceptor (FI) is a thermoplastic combination male/female device with power in to fixture plug and a power out receptacle. Designed to be factory (flush mount) installed in light fixtures, the FI provides leads for quick connection. Quantity required = number of fixtures in the system

The Starter Cable Set (SCS) is the power supply connection for each lighting circuit from a standard outlet box. Power supply end has a moulded thermoplastic, right angle female connector for low profile connection to FI or Switch Tap. Armour is removed at opposite end to provide tails for easy field termination. Quantity required = number of lighting circuits

The Joiner Cable Set (JCS) provides interconnections between light fixtures or Switch Taps. Moulded thermoplastic right angle connectors provide secure, low profile connections. Quantity required = sum of fixtures and Switch Taps

The Switch Tap (SWI) provides for switched areas with circuits connected to each Starter Cable Set. Quantity required = one for each switch

The Switch Cable Set (SWCS) provides connection to a wall switch or relay to control lighting. The moulded thermoplastic male connector mates with the switch outlet on the Switch Tap and the opposite end is prepared for easy field termination. Quantity required = one for each switch

• 20A 347V Single Circuit (100-Series) System
• 20A 125V Single Circuit (100-Series) System

• "w2" Series rated 20A 125/250V ("w" = 3 to 9 wires; up to 3L 3N 2IG +G)
• "w4" Series rated 20A 125/250V ("w" = 3 to 9 wires; up to 4L 4N +G)
• "w6" Series rated 20A 125/250V ("w" = 3 to 5 wires; up to 3L 1N +G)
• "w7" Series rated 20A 277/480V or 347/600V ("w" = 3 to 7 wires; up to 4L 2N +G)

Shop drawings are currently unavailable online, please contact Electec for technical information

Meeting the most demanding of needs at the US Embassy in Ottawa

A cost-effective, flexible and customized solution for IKEA stores across North America and Japan